2.2kW vibration motor for vibrating screen

2022-01-18

YZS vibration motor can be used as a vibration source for all kinds of vibration machinery, such as vibration feeder, vibration conveyor, vibrating screen machine. LZZG mainly produces yzs vibration motor, horizontal vibration motor and other products, products can be customized according to the installation size, voltage level, grid frequency, special insulation level and other requirements, factory direct sales.

1 Extended lead.
2. Ductile iron body
3. The excitation vibration force and power are properly matched, the vibration force is large, the weight of the body is light, the volume is small, and the mechanical noise is low.
4. Complete specifications, can meet the needs of all kinds of vibration machinery.
5. Fully enclosed structure, can work under any dust conditions without explosion-proof requirements.
6. The direction of the excitation force can be changed according to the installation mode of the vibration motor.
7. Only need to adjust the angle of the eccentric block, you can adjust the excitation force steplessly.
8. Easy maintenance.

Ambient temperature: -20°C~+40°C
Haiba: < 1000 m
Voltage: 380 V
Insulation class: B class or F class
Power supply frequency: 50 Hz
Mode of work: Continuous
Installation: Any orientation
Vibration acceleration: not more than 20G (G is gravitational acceleration);
Host excitation power: not more than the provisions of the nameplate, (otherwise the excitation force should be reduced);

Adjust vibration motor
The vibration motor has a fixed eccentric block and an adjustable eccentric block at each end of the shaft, and the angle between the adjustable eccentric block and the fixed eccentric block can change the size of the excitation force.

It should be noted that when adjusting the excitation force, the adjustable eccentric block on the shaft at both ends of the vibrating motor should be adjusted to the same angle in the same direction.

Adjustment steps for excitation force
1. Remove the protective cover.
2. Tighten the bolts of the outer eccentric block of the loosening.
3. The eccentric block on both sides should be rotated in the same direction, so that the engraved line on the axis is aligned with the excitation force indication line on the eccentric block to the desired excitation force value, and check whether the two ends are the same angle.